SOPORTES BIPARTIDOS "SNL" (NO INCLUYE SELLOS), "SOFN" , "SONL" Y "SSNLD"  FSNL 216   SNL 206-305  SNL 3140   SNL 517 K7
 
OBT Bearing           2017-8-9

SKF  Bearing housings
Split plummer (pillow) block housings, SNL and SE 2, 3, 5 and 6 series
Split plummer (pillow) block housings, SNLN 30 series
Split plummer (pillow) block housings, SNL 30, 31 and 32 series
Split plummer (pillow) block housings, SONL series
Split pillow (plummer) block housings, SAF and SAW series (inch dimensions)
Split pillow (plummer) block housings, SDAF series (inch dimensions)
Non-split plummer (pillow) block housings and take-up housings, SBD and THD series
Flanged housings, FNL series
Two-bearing housings, PD series
Housings for paper machines, SBFN, SBPN and SDM series
Trunnion bearing housings, FSDR .. K series

Examples and the applicable options for SNL and SE housings are given below.

Prefixes for bolt holes
– Two oblong cast holes for attachment bolts
F Four oblong cast holes for attachment bolts
S No holes for attachment bolts (drilled holes can be supplied)

Series
SNL           Standard plummer block housing
SE             Standard plummer block housing (new generation)
SONL        Plummer (pillow) block housing for oil lubrication
SNLN         Standard plummer block housing

Material
– Grey cast iron
D Spheroidal graphite cast iron

Size identification
2(00) Housing for bearings on a cylindrical seat, diameter series 2
3(00) Housing for bearings on a cylindrical seat, diameter series 3
5(00) Housing for bearings on an adapter sleeve, diameter series 2
6(00) Housing for bearings on an adapter sleeve, diameter series 3
..(00)  Size code of the bearing, (00) x 5 = bearing bore diameter [mm]
 
Suffixes1)
V Grease escape hole in the housing base
TURU Housing prepared for oil lubrication, including seals
T Drilled and tapped hole 1/4-28 UNF on one side of the housing cap to lubricate the seal. Grease fitting AH 1/4-28 SAE-LT supplied with the housing.
TD Drilled and tapped hole 1/4-28 UNF on both sides of the housing cap to lubricate the seals. Two grease fittings AH 1/4-28 SAE-LT supplied with the housing.
SN Drilled and tapped M8 hole for sensor in position 3 (fig. 1)
K7               Housing with bearing seat diameter tolerance K7
/MS1 Two drilled holes for attachment bolts
/MS2 Four drilled holes for attachment bolts
RA Housing for CARB toroidal roller and self-aligning ball bearings when using a circulating oil lubrication system
FRB            Locating ring for SKF bearing housings

 
SOPORTES BIPARTIDOS "SNL" (NO INCLUYE SELLOS), "SOFN" , "SONL" Y "SSNLD"  FSNL 216   SNL 206-305  SNL 3140   SNL 517 K7

Número de Parte
FSE 513-611
FSNL 216
FSNL 517
FSNL 522-619
FSNL 530
FSNL 532
SNL 205
SNL 206-305
SNL 207
SNL 208-307
SNL 209
SNL 212
SNL 215
SNL 216
SNL 217
SNL 218
SNL 3036
SNL 3048
SNL 3134
SNL 3134 G
SNL 3136
SNL 3138
SNL 3140
SNL 3144
SNL 3148
SNL 3148 G
SNL 3152
SNL 3152 G
SNL 3156
SNL 3160
SNL 3164
SNL 505
SNL 506-605
SNL 507-606
SNL 508-607
SNL 509
SNL 509 K7
SNL 510-608
SNL 510-608 K7
SNL 510-608 VU
SNL 512-610
SNL 515-612
SNL 515-612 K7
SNL 516-613
SNL 516-613 K7
SNL 517
SNL 517 K7
SNL 517 V
SNL 517 VU
SNL 518-615
SNL 518-615 K7
SNL 518-615 VU
SNL 519-616
SNL 520-617
SNL 520-617 K7
SNL 522-619
SNL 522-619 K7
SNL 522-619 VU
SNL 524-620
SNL 524-620 K7
SNL 524-620 V
SNL 526
SNL 526 K7
SNL 526 V
SNL 528
SNL 528 K7
SNL 530
SNL 530 K7
SNL 530 TURU
SNL 530 V
SNL 532
SNLN 3026
SNLN 3032
SNLN 3034
SNLN 3036
SNLN 3038
SNLN 3044
SOFN 322 BL
SOFN 611 BF
SOFN 611 BL
SOFN 612 BF
SOFN 612 BL
SOFN 616 BL
SOFN 620 BF
SOFN 622 BF
SOFN 622 BL
SONL 217-517
SONL 220-520
SONL 222-522
SONL 224-524
SONL 230-530
SONL 232-532
SSNLD 216
SSNLD 516-613
SSNLD 517
SSNLD 518-615
SSNLD 519-616
SSNLD 520-617
SSNLD 522-619
SSNLD 524-620
SSNLD 526
SSNLD 528

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman