Products
 
 Linear Guideway

 Precision Machined Parts

 ГОСТ Подшипники

 Spherical Roller Bearing

 Self Aligning Ball Bearings

 Tapered Roller Bearings

 Cylindrical Roller Bearings

 Pillow Block Bearings

 Thrust Ball Bearings

 Thrust Spherical Roller Bearing

 Deep Groove Ball Bearings

 
 
Contact

Contact us:
Sales Mob: 0086-13065032620
(WhatsApp & Wechat& Vibier)
E-mail: obtbearing@163.com
Skype: obtbearing

 
    Info Centre  

REPUESTOS "Y" PARA CHUMACERAS SELLADAS PARA EJES EN PULGADAS  YAR 203-010-2F  YAR 205-2RF  
YAR 210-112-2F

 
OBT Bearing           2017-8-9

Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are prelubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.

There are numerous bearing and housing combinations to accommodate a diversity of mounting surfaces, load requirements, shaft sizes and dimensional requirements.

Bearings include the YAR, YEL, YET and YSP series of wide inner ring bearings.

The complete designation for a Y-bearing or a Y-bearing unit consists of a basic designation with or without one prefix and/or one or more suffixes.

For details about Y-bearing designation system, refer to Y-bearings.

YAR    Bearing with grub screws, inner ring extended on both sides
YARAG     Bearing with grub screws, inner ring extended on both sides, 5-lip seals, without lubrication holes
YAT     Bearing with grub screws, inner ring extended on one side
YEL    Bearing with an eccentric locking collar, inner ring extended on both sides
YELAG    Bearing with an eccentric locking collar, inner ring extended on both sides, 5-lip seals, without lubrication holes
YET   Bearing with an eccentric locking collar, inner ring extended on one side
YSA    Bearing with a tapered bore, inner ring symmetrically extended on both sides
YSP    Bearing with SKF ConCentra locking technology, inner ring symmetrically extended on both sides
YSPAG    Bearing with SKF ConCentra locking technology, inner ring symmetrically extended on both sides, 5-lip seals, without lubrication holes
172    Bearing with a standard inner ring
CYS    Bearing in the YET 2 series fitted with a rubber seating ring

Dimension series
2 Outside diameter to ISO 15, diameter series 2
62 Bearing in accordance with ISO 15, dimension series 02, sphered outside surface
63 Bearing in accordance with ISO 15, dimension series 03, sphered outside surface

Suffixes - Internal design
B             Lubrication holes in the outer ring (only for bearings with a standard inner ring)
SB              SKF ConCentra ball bearing with shortened inner ring

Suffixes - External design (seals, snap ring groove etc.)
–2F Contact seal, NBR, additional plain flinger, on both sides
-2RF Contact seal, NBR, additional rubberized flinger, on both sides
-2RS1 Contact seal, NBR, on both sides
C Cylindrical outside surface
G Lubrication groove in the outside surface, located at the side opposite the locking device
GR        Lubrication groove in the outside surface, located at the side of the locking device
K Tapered bore, taper 1:12
U Bearing without locking device

Suffixes - Materials, heat treatment
HV Bearing components of stainless steel; seals and flingers with food-compatible rubber; food-grade grease
VE495         Zinc-coated inner and outer rings; seals and flingers with stainless steel inserts and food-compatible rubber; food-grade grease
VL065         Zinc-coated inner ring bore and side faces
W              Bearing without lubrication hole(s)
Suffixes - Other variants
AH     Bearing for air-handling applications
VP076 Shield on both sides
VP274      Contact seal, NBR, on both sides (only for bearings with a standard inner ring)

REPUESTOS "Y" PARA CHUMACERAS SELLADAS PARA EJES EN PULGADAS  YAR 203-010-2F  YAR 205-2RF  
YAR 210-112-2F


Número de Parte
YAR 203/12-2F
YAR 203/15-2F
YAR 203-008-2F
YAR 203-010-2F
YAR 204-012-2F
YAR 204-012-2RF/HV
YAR 204-2FW/VA228
YAR 205-014-2F
YAR 205-015-2F
YAR 205-100-2F
YAR 205-100-2FW/VA201
YAR 205-100-2RF/HV
YAR 205-2FW/VA201
YAR 205-2RF
YAR 205-2RF/HV
YAR 206-101-2F
YAR 206-102-2F
YAR 206-103-2F
YAR 206-103-2FW/VA228
YAR 206-104-2F
YAR 206-2FW/VA228
YAR 207-104-2F
YAR 207-105-2F
YAR 207-106-2F
YAR 207-107-2F
YAR 208-107-2F
YAR 208-108-2F
YAR 208-108-2RF
YAR 208-108-2RF/HV
YAR 208-108-2RF/HVW64
YAR 208-109-2F
YAR 208-2RF
YAR 209-108-2F
YAR 209-110-2F
YAR 209-111-2F
YAR 209-111-2FW/VA201
YAR 209-112-2F
YAR 209-112-2FW/VA201
YAR 210-111-2F
YAR 210-112-2F
YAR 210-115-2F
YAR 210-2FW/VA228
YAR 211-115-2F
YAR 211-200-2F
YAR 211-200-2FW/VA201
YAR 211-200-2FW/VA228
YAR 211-203-2F
YAR 212-203-2F
YAR 212-204-2F
YAR 212-207-2F
YAR 213-208-2F
YAR 213-208-2RF
YAR 213-211-2F
YAR 214-207-2F
YAR 214-208-2F
YAR 214-2F
YAR 215-211-2F
YAR 215-212-2F
YAR 215-215-2F
YAR 216-215-2F
YAR 216-2F
YAR 216-300-2F
YAT 204-012
YAT 205-100
YAT 206
YAT 206-103
YAT 207-107
YAT 208-108
YEL 204-012-2F
YEL 205-014-2F
YEL 205-015-2F
YEL 205-100-2F
YEL 205-100-2FW
YEL 206-102-2F
YEL 206-102-2FWU
YEL 206-103-2F
YEL 206-104-2F
YEL 206-104-2FW
YEL 207-104-2F
YEL 207-106-2F
YEL 207-107-2F
YEL 207-107-2F/W64
YEL 208-106 VAC-F
YEL 208-108-2F
YEL 209-110-2F
YEL 209-111-2F
YEL 209-112-2F
YEL 210-115-2F
YEL 211-200-2F
YEL 211-203-2F
YEL 212-204-2F
YEL 212-207-2F
YET 203-008 W
YET 203-010
YET 203-010 W
YET 204-012
YET 204-012 W
YET 205-014
YET 205-014 W
YET 205-100
YET 205-100 CW
YET 205-100 W
YET 206-101 W
YET 206-102
YET 206-102 W
YET 206-103
YET 206-103 CW
YET 206-103 W
YET 206-104
YET 206-104 CW
YET 206-104 W
YET 207-104
YET 207-104 W
YET 207-106
YET 207-106 W
YET 207-107
YET 207-107 W
YET 208-108
YET 208-108 CW
YET 208-108 W
YET 209-111
YET 209-112
YET 209-112 W
YET 210-115
YET 210-115 CW
YET 210-115 W
YET 211-200
YET 211-203
YHC 207-102-2LS8W/VT357
YSA 213-2FK


More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite:
www.obtbearing.com  
E-mail:
obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620


tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman

About OBT | Info Centre | Products | Technical Info | Feedback | Contact us
Professional for the bearings manufacture and export - Mobile:0086-13065032620
Copyright © 2010 Company Name:Shandong OBetter bearing co.,Ltd All Rights Reserved