REPUESTOS "Y" PARA CHUMACERAS SELLADAS PARA EJES MILIMÉTRICOS
 
OBT Bearing           2017-8-9

Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are prelubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.

There are numerous bearing and housing combinations to accommodate a diversity of mounting surfaces, load requirements, shaft sizes and dimensional requirements.

Bearings include the YAR, YEL, YET and YSP series of wide inner ring bearings.

The complete designation for a Y-bearing or a Y-bearing unit consists of a basic designation with or without one prefix and/or one or more suffixes.

For details about Y-bearing designation system, refer to Y-bearings.

YAR Bearing with grub screws, inner ring extended on both sides
YARAG Bearing with grub screws, inner ring extended on both sides, 5-lip seals, without lubrication holes
YAT Bearing with grub screws, inner ring extended on one side
YEL Bearing with an eccentric locking collar, inner ring extended on both sides
YELAG Bearing with an eccentric locking collar, inner ring extended on both sides, 5-lip seals, without lubrication holes
YET Bearing with an eccentric locking collar, inner ring extended on one side
YSA Bearing with a tapered bore, inner ring symmetrically extended on both sides
YSP Bearing with SKF ConCentra locking technology, inner ring symmetrically extended on both sides
YSPAG Bearing with SKF ConCentra locking technology, inner ring symmetrically extended on both sides, 5-lip seals, without lubrication holes
172 Bearing with a standard inner ring
CYS Bearing in the YET 2 series fitted with a rubber seating ring

Dimension series
2 Outside diameter to ISO 15, diameter series 2
62 Bearing in accordance with ISO 15, dimension series 02, sphered outside surface
63 Bearing in accordance with ISO 15, dimension series 03, sphered outside surface

Suffixes - Internal design
B             Lubrication holes in the outer ring (only for bearings with a standard inner ring)
SB              SKF ConCentra ball bearing with shortened inner ring

Suffixes - External design (seals, snap ring groove etc.)
–2F Contact seal, NBR, additional plain flinger, on both sides
-2RF Contact seal, NBR, additional rubberized flinger, on both sides
-2RS1 Contact seal, NBR, on both sides
C Cylindrical outside surface
G Lubrication groove in the outside surface, located at the side opposite the locking device
GR        Lubrication groove in the outside surface, located at the side of the locking device
K Tapered bore, taper 1:12
U Bearing without locking device

REPUESTOS "Y" PARA CHUMACERAS SELLADAS PARA EJES MILIMÉTRICOS

Número de Parte
BBY-5513
BBY-5514
YAR 203-2F
YAR 204-2F
YAR 205-2F
YAR 206-2F
YAR 207-2F
YAR 208-2F
YAR 209-2F
YAR 209-2FW/VA201
YAR 209-2FW/VA228
YAR 210-2F
YAR 210-2RF
YAR 211-2F

YAR 212-2F
YAR 218-2F
YAT 203
YAT 205
YAT 207
YEL 204-2F
YEL 205-2F
YEL 206-2F
YEL 207-2F
YEL 208-2F
YEL 208-2RF/VL065
YEL 209-2F
YEL 210-2F
YEL 211-2F
YEL 212-2F
YET 203
YET 203/15
YET 203-008
YET 204
YET 205
YET 206
YET 207
YET 208
YET 209
YET 210
YET 211
YET 212
YSA 206-2FK
YSA 211-2FK

SOPORTES BIPARTIDOS Y ACCESORIOS

Número de Parte
PDN 314
PDN315
PDN 316
PDN210
PDN305
PND212
PDN324

OTRAS UNIDADES "Y"
Número de Parte
CYS 20 FM
CYS 25 FM
CYS 30 FM
CYS 35 FM
MRC.C2F012ZM
MRC.C4F100SS
MRC.CPB012SSG
MRC.CPB100SSG
MRC.CPB104SSG

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman