SKF  CHUMACERAS SELLADAS DE BOLAS LIBRES DE MANTENIMIENTO O CON ACERO INOX. , COMPATIBLES CON ALIMENTOS
 
OBT Bearing           2017-8-9

Ball bearing units consist of a precision wide inner ring bearing assembled into a housing made of cast iron or pressed steel. Units are prelubricated and are designed to slip fit on to the shaft. Locking method is either set screw locking, eccentric self-locking or concentric. On cast iron and pressed steel units, the outside diameter of the bearing and the inside diameter of the housing are sphered, allowing the bearing to swivel within the housing to accommodate initial alignment.

There are numerous bearing and housing combinations to accommodate a diversity of mounting surfaces, load requirements, shaft sizes and dimensional requirements.

Bearings include the YAR, YEL, YET and YSP series of wide inner ring bearings.

The complete designation for a Y-bearing or a Y-bearing unit consists of a basic designation with or without one prefix and/or one or more suffixes.

For details about Y-bearing designation system, refer to Y-bearings.

Housing/unit type

TU Take-up housing
A              Next smaller size than normal (inch units only)
L              Suitable for ECL end cover
N               In case of SKF Food Line Y-bearing units only used in combination with suffix
J            stands for dimensions in accordance with JIS 1559-2009

W          at the end of the housing series designation identifies an SKF Food Line Y-bearing unit or housing
FY          Square flanged housing
FYA            3-bolt bracket flanged housing
FYC             Round flanged housing
FYM            Square flanged housing, higher load carrying capacity
FYT(B)        Oval flanged housing
PF             Round flanged housing, pressed steel
PFD          Triangular flanged housing, pressed steel
PFT            Oval flanged housing, pressed steel

Housing material
–                Grey cast iron
K                  Composite
R                 Stainless steel

Additional housing features
A    Next smaller size than normal (inch units only)
L    Suitable for ECL end cover
N      Relubricable execution of composite housing.
Y   Suitable for ECW end cover

Inserted Y-bearing
FM               Y-bearing with an eccentric locking collar, YET 2 series
KF             Y-bearing with a tapered bore on an adapter sleeve, YSA 2-2FK series
LD, LDW       Y-bearing with SKF ConCentra locking, YSPAG 2 series
LF                Y-bearing with SKF ConCentra locking, YSP 2-2F series
RM             Y-bearing with grub screws, YAT 2 series
TA               SKF Food Line Y-bearing with grub screws, YAR 2-2RF/VE495 series
TD, TDW        Y-bearing with grub screws, YARAG 2 series
TF                Y-bearing with grub screws, YAR 2-2F series
TH               SKF Food Line Y-bearing with grub screws, YAR 2-2RF/HV series
THR                SKF Food Line Y-bearing with grub screws, YAR 2-2RFGR/HV series
TR                Y-bearing with grub screws, YAR 2-2RF series
WD, WDW               Y-bearing with an eccentric locking collar, YELAG 2 series
WF                      Y-bearing with an eccentric locking collar, YEL 2-2F series
WR                    Y-bearing with an eccentric locking collar, YEL 2-2RF series
VZ1A2     Relubricable execution of SKF Food Line Y-bearing unit with composite housing, only used in combination with suffix N
AH Y-unit for air-handling application
VL065 Zinc-coated bearing inner ring bore and side faces

CHUMACERAS SELLADAS DE BOLAS LIBRES DE MANTENIMIENTO O CON ACERO INOX. , COMPATIBLES CON ALIMENTOS

Número de Parte
FYTBK 20 TF
FYTBK 25 TF
FYTBK 25 TR
FYTBK 30 TF
FYTBK 30 TR
FYTBK 35 TF
FYTBK 35 TR
FYTWK 1. YTA
FYTWK 1.1/4 YTA
FYTWK 1.3/16 YTA
FYTWK 1.7/16 YTA
FYWK 1. YTA
FYWK 1.1/2 YTA
FYWK 1.1/4 YTA
FYWK 3/4 YTA
SYKC 40 TR/VZ393
SYWK 1. YTA
SYWK 1.1/2 YTH
SYWK 1.1/4 YTA
SYWK 3/4 YTA
FYTWK 506 Y
YAR 206-103-2RF/VE495
ECW 206

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman