RODAMIENTOS DE RODILLOS A ROTULA  23276 CAK/W33  , 23988 CC/W33  ,  24080 ECCK30J/C3W33  , 24126 CC/W513   , 24140 CCK30/W33
 
OBT Bearing           2017-8-3

RODAMIENTOS DE RODILLOS A ROTULA

Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis.   The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning ,   and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as

well as heavy axial loads in both directions.

Prefixes
BS2-..        Bearing, designated by a drawing number
ZE               Bearing with SensorMount feature

Suffixes - Internal design
CA, CAC                   Retaining flanges on the inner ring, guide ring centred on the inner ring, machined brass cage
CC(J), CJ                   Flangeless inner ring, guide ring centred on the inner ring, two stamped steel cages
CCJA, EJA                 Flangeless inner ring, guide ring centred on the outer ring raceway, two stamped steel cages
 
E                                 Optimized internal design for increased load carrying capacity
                                  213, 222 and 223 series: Flangeless inner ring and two stamped steel cages. Annular groove  and three lubrication holes in the outer ring.
                                  d ≤ 65 mm: Guide ring centred on the inner ring
                                  d > 65 mm: Guide ring centred on the cage

Suffixes - External design (seals, snap ring groove etc.)
-CS, -2CS    Contact seal, NBR, on one or both sides
-CS2, -2CS2    Contact seal, FKM, on one or both sides
-CS5, -2CS5   Contact seal, HNBR, on one or both sides
-RS, -2RS   Contact seal, NBR, on one or both sides
-RS5, -2RS5    Contact seal, HNBR, on one or both sides
K        Tapered bore, taper 1:12
K30     Tapered bore, taper 1:30

Suffixes - Cage design
F     Machined steel cage, inner ring centred
FA     Machined steel cage, outer ring centred
J      Stamped steel cage, inner ring centred
JA      Stamped steel cage, outer ring centred
MA     Machined brass cage, outer ring centred

Suffixes - Materials, heat treatment
235220     Case-hardened inner ring with a helical groove in the bore
HA3      Case-hardened inner ring

Suffixes -Accuracy, clearance, preload, quiet running
C08             Running accuracy to P5 tolerance class
C083      C08 + C3
C084      C08 + C4
C2     Radial internal clearance smaller than Normal
C3     Radial internal clearance greater than Normal
C4     Radial internal clearance greater than C3
C5     Radial internal clearance greater than C4
P5      Dimensional and running accuracy to P5 tolerance class
P6     Dimensional and running accuracy to P6 tolerance class
P62     P6 + C2

Suffixes - Lubrication
GEM9     Filled to 70 – 100% with SKF LGHB 2 grease
GLE         Filled to 25 - 45% with SKF LGWM 2 grease
VT143     Filled to 25 – 45% with SKF LGEP 2 grease
VT143B     Filled to 45 – 60% with SKF LGEP 2 grease
VT143C     Filled to 70 – 100% with SKF LGEP 2 grease
W64      Solid Oil
W     Without annular groove and lubrication holes in the outer ring
W20     Three lubrication holes in the outer ring
W26      Six lubrication holes in the inner ring
W33     Annular groove and three lubrication holes in the outer ring
W33X     Annular groove and six lubrication holes in the outer ring
W77      Plugged W33 lubrication holes
W513      W26 + W33

Suffixes - Other variants
VA405      Bearing for vibratory applications, surface-hardened stamped steel cages
VA406      Same as VA405, but PTFE coated cylindrical inner ring bore
VE552(E)     Outer ring with three equally-spaced threaded holes in one side face to accommodate
lifting tackle. The E indicates that appropriate eye bolts are supplied with the bearing.
VE553(E)       Same as VE552(E), but threaded holes in both side faces
VG114       Surface-hardened stamped steel cages
VQ424    Running accuracy better than C08

the self-aligning roller bearing  as follows ,

Número de parte
23268 CA/C3W33
23268 CA/W33
23268 CAK/C3W33
23268 CAK/W33
23272 CA/C3W33
23272 CA/W33
23272 CAK/C3W33
23272 CAK/W33
23276 CA/W33
23276 CAK/W33
23280 CA/C3W33
23280 CAK/C3W33
23280 CAK/W33
23284 CA/W33
23292 CAK/C3W33
23292 CAK/C4W33
23292 CAK/W33
23936 CC/C3W33
23936 CC/W33
23936 CCK/W33
23938 CC/W33
23940 CC/C3W33
23940 CC/C5W33
23940 CC/W33
23944 CC/C3W33
23944 CC/W33
23944 CCK/C3W33
23944 CCK/W33
23948 CC/W33
23948 CCK/C3W33
23952 CC/C3W33
23952 CC/W33
23952 CCK/C3W33
23952 CCK/C4W33
23956 CC/C3W33
23956 CC/W33
23960 CC/C3W33
23964 CC/C3W33
23964 CC/W33
23964 CCK/W33
23968 CCK/C3W33
23968 CCK/W33
23972 CC/C3W33
23972 CC/W33
23972 CCK/C4W33
23972 CCK/W33
23976 CC/C3W33
23976 CC/W33
23976 CCK/C4W33
23976 CCK/W33
23980 CC/C3W33
23980 CCK/C08W33
23984 CC/C3W33
23984 CC/C4W33
23984 CC/W33
23984 CCK/C3W33
23984 CCK/W33
23988 CC/W33
23988 CCK/C3W33
23988 CCK/W33
23992 CA/C3W33
23992 CA/W33
23996 CA/C2W33
23996 CA/C3W33
23996 CA/W33
23996 CAK/W33
24015-2CS2/GEM9
24020 CC/C3W33
24020 CC/W33
24020-2CS2/VT143B
24024 CC/C3W33
24024 CC/C4W33
24024 CC/W33
24024 CCK30/C3W33
24024 CCK30/W33
24026 CC/C4W33
24026 CC/W33
24026 CCK30/C3W33
24026 CCK30/W33
24028 CC/C4W33
24028 CC/W33
24028 CCK30/C3W33
24028 CCK30/W33
24028-2CS5/VT143
24030 CC/C4W33
24030 CC/W33
24030 CCK30/C3W33
24030 CCK30/C4W33
24030 CCK30/W33
24032 CC/C3W33
24032 CC/C4W33
24032 CC/W33
24032 CCK30/C4W33
24032 CCK30/C5W33
24032 CCK30/W33
24034 CC/W33
24034 CCK30/C3W33
24034 CCK30/C4W33
24034 CCK30/W33
24036 CC/C084W33
24036 CC/C3W33
24036 CC/C4W33
24036 CC/W33
24036 CCK30/C3W33
24036 CCK30/W33
24038 CC/C4W33
24038 CC/W33
24038 CCK30/C3W33
24038 CCK30/W33
24040 CC/C3W33
24040 CC/C4W33
24040 CC/W33
24040 CCK30/W33
24044 CC/C2W33
24044 CC/W33
24044 CCK30/W33
24048 CC/C3W33
24048 CC/W33
24048 CCK30/C3W33
24048 CCK30/C4W33
24048 CCK30/W33
24052 CC/C3W33
24052 CC/W33
24052 CCK30/C3W33
24052 CCK30/W33
24056 CC/C2W33
24056 CCK30/C3W33
24056 CCK30/W33
24060 CAC/C3W33
24060 CAC/W33
24060 CC/C3W33
24060 CCK30/C3W33
24060 CCK30/C4W33
24060 CCK30/W33
24064 CC/C3W33
24064 CC/W33
24064 CCK30/C3W33
24068 CC/C3W33
24068 CC/W33
24068 CCK30/C3W33
24068 CCK30/W33
24076 CC/C3W33
24076 CCK30/C3W33
24076 CCK30/W33
24080 ECCJ/C3W33
24080 ECCJ/C4W33
24080 ECCK30J/C3W33
24080 ECCK30J/W33
24096 ECA/C3W33
24096 ECA/W33
24096 ECAK30/C3W33
24096 ECAK30/W33
24120 CC/W33
24122 CC/C3W33
24122 CC/C4W33
24122 CC/W33
24122 CCK30/W33
24124 CC/W33
24124 CCK30/C3W33
24124 CCK30/C4W33
24124 CCK30/W33
24126 CC/C4W33
24126 CC/W33
24126 CC/W513
24126 CCK30/C3W33
24126 CCK30/C4W33
24128 CC/C3W33
24128 CC/C4W33
24128 CC/W33
24128 CCK30/C3W33
24128 CCK30/W33
24130 CC/C4W33
24130 CC/W33
24130 CCK30/C2LW33VG004
24130 CCK30/C3W33
24132 CC/C3W33
24132 CC/C4W33
24132 CC/W33
24132 CCK30/C3W33
24132 CCK30/W33
24134 CCK30/C3W33
24134 CCK30/W33
24136 CC/C3W33
24136 CCK30/C3W33
24136 CCK30/W33
24138 CC/C3W33
24138 CCK30/C2LW33VG004
24138 CCK30/C3W33
24138 CCK30/W33
24140 CC/C2W33
24140 CC/C3W33
24140 CC/C4W33
24140 CCK30/C3W33
24140 CCK30/W33

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

 
More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman