SKF RODAMIENTOS DE RODILLOS A ROTULA 23056 CACK/W33 , 23080 CAC/W33  , 23156 CAC/C3W33 ,23260 CCK/C3W33  , 23264 CCK/W33
 
OBT Bearing           2017-8-3

RODAMIENTOS DE RODILLOS A ROTULA

Spherical roller bearings have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis.   The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning ,   and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

Prefixes
BS2-..        Bearing, designated by a drawing number
ZE               Bearing with SensorMount feature

Suffixes - Internal design
CA, CAC                   Retaining flanges on the inner ring, guide ring centred on the inner ring, machined brass cage
CC(J), CJ                   Flangeless inner ring, guide ring centred on the inner ring, two stamped steel cages
CCJA, EJA                 Flangeless inner ring, guide ring centred on the outer ring raceway, two stamped steel cages
 
E                                 Optimized internal design for increased load carrying capacity
                                  213, 222 and 223 series: Flangeless inner ring and two stamped steel cages. Annular groove   and    three                      lubrication holes in the outer ring.
                                  d ≤ 65 mm: Guide ring centred on the inner ring
                                  d > 65 mm: Guide ring centred on the cage

Suffixes - External design (seals, snap ring groove etc.)
-CS, -2CS    Contact seal, NBR, on one or both sides
-CS2, -2CS2    Contact seal, FKM, on one or both sides
-CS5, -2CS5   Contact seal, HNBR, on one or both sides
-RS, -2RS   Contact seal, NBR, on one or both sides
-RS5, -2RS5    Contact seal, HNBR, on one or both sides
K        Tapered bore, taper 1:12
K30     Tapered bore, taper 1:30

Suffixes - Cage design
F     Machined steel cage, inner ring centred
FA     Machined steel cage, outer ring centred
J      Stamped steel cage, inner ring centred
JA      Stamped steel cage, outer ring centred
MA     Machined brass cage, outer ring centred

Suffixes - Materials, heat treatment
235220     Case-hardened inner ring with a helical groove in the bore
HA3      Case-hardened inner ring

Suffixes -Accuracy, clearance, preload, quiet running
C08             Running accuracy to P5 tolerance class
C083      C08 + C3
C084      C08 + C4
C2     Radial internal clearance smaller than Normal
C3     Radial internal clearance greater than Normal
C4     Radial internal clearance greater than C3
C5     Radial internal clearance greater than C4
P5      Dimensional and running accuracy to P5 tolerance class
P6     Dimensional and running accuracy to P6 tolerance class
P62     P6 + C2

Suffixes - Lubrication
GEM9     Filled to 70 – 100% with SKF LGHB 2 grease
GLE         Filled to 25 - 45% with SKF LGWM 2 grease
VT143     Filled to 25 – 45% with SKF LGEP 2 grease
VT143B     Filled to 45 – 60% with SKF LGEP 2 grease
VT143C     Filled to 70 – 100% with SKF LGEP 2 grease
W64      Solid Oil
W     Without annular groove and lubrication holes in the outer ring
W20     Three lubrication holes in the outer ring
W26      Six lubrication holes in the inner ring
W33     Annular groove and three lubrication holes in the outer ring
W33X     Annular groove and six lubrication holes in the outer ring
W77      Plugged W33 lubrication holes
W513      W26 + W33

the self-aligning roller bearing  as follows ,

Número de parte
23056 CACK/W33
23056 CC/C08W525
23056 CC/W33
23056 CCK/C3W33
23056 CCK/C4W33
23056 CCK/W33
23060 CAC/C08W507
23060 CACK/C3W33
23060 CACK/C4W33
23060 CC/C08W33
23060 CC/C4W33
23060 CC/W33
23060 CCK/C3W33
23060 CCK/C4W33
23060 CCK/W33
23064 CC/C083W509
23064 CC/C08W33
23064 CC/C08W525
23064 CC/C4W33
23064 CC/W33
23064 CC/W513
23064 CCK/C083W33
23064 CCK/W33
23068 CAC/C3W33
23068 CACK/C3W33
23068 CC/W33
23068 CCK/C4W33
23072 CAC/C08W506
23072 CAC/C08W509
23072 CAC/C3W33
23072 CACK/C3W33
23072 CACK/C4W33
23072 CC/W33
23072 CCK/C4W33
23072 CCK/W33
23076 CAC/C08W507
23076 CAC/W33
23076 CACK/C3W33
23076 CCK/C3W33
23076 CCK/C4W33
23076 CCK/W33
23080 CAC/C08W509
23080 CAC/W33
23080 CACK/C3W33
23080 CC/C08W33
23080 CC/C4W33
23080 CC/W33
23080 CC/W513
23080 CCK/W33
23084 CA/C3W33
23084 CA/W33
23084 CAK/C083W506
23084 CAK/C3W33
23084 CAK/W33
23088 CA/C3W33
23088 CAK/C3W33
23088 CAK/C4W33
23092 CA/C4W33
23092 CA/W33
23092 CAK/C4W33
23096 CA/W33
23096 CAK/C3W33
23096 CAK/C4W33
23096 CAK/W33
23120 CC/C3W33
23120 CC/C4W33
23120 CC/W33
23120 CCK/C3W33
23120 CCK/W33
23122 CC/C3W33
23122 CC/W33
23122 CCK/C3W33
23122 CCK/W33
23124 CC/C3W33
23124 CC/C4W33
23124 CC/W33
23124 CCK/C3W33
23124 CCK/C4W33
23124 CCK/W33
23126 CC/C3W33
23126 CC/C4W33
23126 CC/W33
23126 CCK/C3W33
23126 CCK/W33
23128 CC/C3W33
23128 CC/W33
23128 CCK/W33
23130 CC/C3W33
23130 CC/W33
23130 CCK/C3W33
23130 CCK/C4W33
23132 CC/C3W33
23132 CC/W33
23132 CCK/W33
23134 CC/C3W33
23134 CC/C4W33
23134 CC/W33
23134 CCK/C3W33
23134 CCK/C4W33
23134 CCK/W33
23136 CC/C3W33
23136 CC/W33
23136 CCK/C3W33
23136 CCK/W33
23138 CC/C3W33
23138 CC/W33
23138 CCK/C3W33
23138 CCK/C4W33
23138 CCK/W33
23140 CC/C3W33
23140 CC/C4W33
23140 CC/W33
23140 CCK/C08W33
23140 CCK/C3W33
23144 CC/C3W33
23144 CC/C5W33
23144 CC/W33
23144 CCK/C3W33
23144 CCK/W33
23148 CC/C3W33
23148 CC/W33
23148 CCK/C4W33
23148 CCK/W33
23152 CAC/C08W507
23152 CAC/C3W33
23152 CACK/C08W507
23152 CACK/C4W33
23152 CACK/W33
23152 CC/C08W33
23152 CC/C3W33
23152 CC/W33VQ424
23152 CCK/HA3C3W33
23152 CCK/W33
23156 CAC/C3W33
23156 CAC/W33
23156 CACK/C08W507
23156 CACK/C2W33
23156 CACK/C3W33
23156 CACK/C4W33
23156 CACK/W33
23156 CC/C3W33
23156 CCK/C08W507
23164 CAC/C083W507
23164 CAC/C3W33
23164 CAC/W33
23164 CACK/C083W507
23164 CACK/C08W507
23164 CC/C4W33
23164 CCK/C3W33
23164 CCK/W33
23164 CCK/W507
23168 CAC/W33
23168 CACK/C3W33
23168 CACK/W33
23168 CC/W33
23168 CCK/C3W33
23168 CCK/C4W33
23172 CAC/C083W509
23172 CC/W33
23172 CCK/C3W33
23172 CCK/W33
23176 CA/C3W33
23176 CA/W33
23176 CAK/C3W33
23176 CAK/W33
23180 CA/C08W33
23180 CA/C08W506
23180 CA/C3W33
23180 CA/W33
23180 CAK/C3W33
23180 CAK/C4W33
23180 CAK/W33
23184 CA/C083W507
23184 CJ/C08W33
23184 CJ/C3W33
23184 CJ/W33
23184 CKJ/W33
23188 CA/C3W33
23188 CA/W33
23188 CAK/C083W33
23188 CAK/C3W33
23188 CAK/C4W33
23188 CAK/W33
23192 CA/C3W33
23192 CA/W33
23196 CA/C3W33
23196 CA/W33
23196 CAK/C3W33
23196 CAK/W33
23218 CC/C3W33
23218 CC/C4W33
23218 CC/C5W33
23218 CC/W33
23218 CCK/C3W33
23218 CCK/W33
23220 CC/C3W33
23220 CC/C4W33
23220 CC/W33
23220 CCK/C3W33
23220 CCK/W33
23222 CC/C3W33
23222 CC/C4W33
23222 CC/W33
23222 CCK/C3W33
23222 CCK/W33
23224 CC/C3W33
23224 CC/W33
23224 CCK/C3W33
23224 CCK/C4W33
23224 CCK/W33
23226 CC/C2MW33
23226 CC/C3W33
23226 CC/C4W33
23226 CC/W33
23226 CCK/C2W33
23226 CCK/C3W33
23226 CCK/W33
23228 CC/C2W33
23228 CC/C3W33
23228 CC/W33
23228 CCK/C082W33
23228 CCK/C3W33
23228 CCK/W33
23228-2CS5/VT143
23230 CC/W33
23230 CCK/W33
23232 CC/W33
23232 CCK/C3W33
23232 CCK/W33
23234 CC/C3W33
23234 CC/W33
23234 CCK/C3W33
23234 CCK/W33
23236 CC/C3W33
23236 CC/C4W33
23236 CC/W33
23236 CCK/W33
23238 CC/C2W33
23238 CC/C3W33
23238 CC/W33
23238 CCK/C3W33
23240 CC/C3W33
23240 CC/W33
23240 CCK/C08W33
23240 CCK/C3W33
23240 CCK/W33
23244 CC/C3W33
23244 CC/W33
23244 CCK/C3W33
23248 CAC/W33
23248 CACK/C08W507
23248 CACK/C3W33
23248 CACK/W33
23248 CC/C3W33
23248 CC/W33
23248 CCK/W33
23252 CAC/C3W502
23252 CACK/W33
23256 CAC/C3W33
23256 CC/W33
23256 CCK/C3W33
23260 CACK/C3W33
23260 CC/C2W33
23260 CC/C3W33
23260 CCK/C3W33
23260 CCK/W33
23264 CAC/C3W33
23264 CACK/C08W507
23264 CC/C3W33
23264 CC/W33
23264 CCK/C3W33
23264 CCK/C4W33
23264 CCK/W33

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL , 

TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings, rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman