RODAMIENTOS DE RODILLOS A ROTULA 22312 EK   , 22316 EK   , 22322 EK/C4  , 22356 CC/W33
 
OBT Bearing           2017-8-3

RODAMIENTOS DE RODILLOS A ROTULA

Spherical roller bearings skf have two rows of rollers, a common sphered outer ring raceway and two inner ring raceways inclined at an angle to the bearing axis.   The centre point of the sphere in the outer ring raceway is at the bearing axis. Therefore, the bearings are self-aligning ,   and insensitive to misalignment of the shaft relative to the housing, which can be caused, for example, by shaft deflection. Spherical roller bearings are designed to accommodate heavy radial loads, as well as heavy axial loads in both directions.

Prefixes
BS2-..        Bearing, designated by a drawing number
ZE               Bearing with SensorMount feature

Suffixes - Internal design
CA, CAC                   Retaining flanges on the inner ring, guide ring centred on the inner ring, machined brass cage
CC(J), CJ                   Flangeless inner ring, guide ring centred on the inner ring, two stamped steel cages
CCJA, EJA                 Flangeless inner ring, guide ring centred on the outer ring raceway, two stamped steel cages
 
E                                 Optimized internal design for increased load carrying capacity
                                  213, 222 and 223 series: Flangeless inner ring and two stamped steel cages. Annular groove                                   and three lubrication holes in the outer ring.
                                  d ≤ 65 mm: Guide ring centred on the inner ring
                                  d > 65 mm: Guide ring centred on the cage

Suffixes - External design (seals, snap ring groove etc.)
-CS, -2CS    Contact seal, NBR, on one or both sides
-CS2, -2CS2    Contact seal, FKM, on one or both sides
-CS5, -2CS5   Contact seal, HNBR, on one or both sides
-RS, -2RS   Contact seal, NBR, on one or both sides
-RS5, -2RS5    Contact seal, HNBR, on one or both sides
K        Tapered bore, taper 1:12
K30     Tapered bore, taper 1:30

Suffixes - Cage design
F     Machined steel cage, inner ring centred
FA     Machined steel cage, outer ring centred
J      Stamped steel cage, inner ring centred
JA      Stamped steel cage, outer ring centred
MA     Machined brass cage, outer ring centred

Suffixes - Materials, heat treatment
235220     Case-hardened inner ring with a helical groove in the bore
HA3      Case-hardened inner ring

the self-aligning roller bearing  as follows ,

Número de parte
22311 EK/C3
22311 EK/VA405
22311 EK/VA751
22312 E
22312 E/C3
22312 E/C4
22312 E/VA405
22312 EK
22312 EK/C3
22312 EK/VA405
22312 EK/VA751
22313 E
22313 E/C3
22313 E/C4
22313 E/VA405
22313 EK
22313 EK/C3
22313 EK/C4
22313 EK/VA405
22314 E
22314 E/C3
22314 E/C4
22314 E/VA405
22314 EK
22314 EK/C3
22315 E
22315 E/C3
22315 E/C4
22315 EJA/VA405
22315 EK
22315 EK/C3
22315 EK/C4
22316 E
22316 E/C3
22316 EJA/VA405
22316 EK
22316 EK/C3
22317 E
22317 E/C3
22317 EJA/VA405
22317 EK
22317 EK/C3
22317 EKJA/VA405
22318 E
22318 E/C3
22318 E/C4
22318 EJA/VA405
22318 EK
22318 EK/C3
22318 EKJA/VA405
22319 E
22319 E/C3
22319 EJA/VA405
22319 EK
22319 EK/C3
22320 E
22320 E/C3
22320 E/C4
22320 EJA/VA405
22320 EJA/VA406
22320 EK
22320 EK/C3
22320 EK/C4
22322 E
22322 E/C3
22322 E/C4
22322 EJA/VA406
22322 EK
22322 EK/C3
22322 EK/C4
22322 EK/W64
22324 CC/C3W33
22324 CC/W33
22324 CCJA/W33VA405
22324 CCK/C3W33
22324 CCK/W33
22324 CCKJA/W33VA405
22326 CC/C103W33
22326 CC/C3W33
22326 CC/C3W502
22326 CC/W33
22326 CCK/C3W33
22326 CCK/W33
22328 CC/C3W33
22328 CC/C4W33
22328 CC/W33
22328 CCJA/W33VA405
22328 CCJA/W33VA406
22328 CCK/C3W33
22328 CCK/W33
22328 CCKJA/W33VA405
22330 CC/C3W33
22330 CC/W33
22330 CCJA/W33VA405
22330 CCK/C3W33
22330 CCK/W33
22332 CACKM2/C3W33
22332 CC/C3W33
22332 CC/C4W33
22332 CC/W33
22332 CCJA/W33VA405
22332 CCJA/W33VA406
22332 CCK/W33
22334 CC/C3W33
22334 CCJA/W33VA405
22334 CCK/C2W33
22334 CCK/C3W33
22334 CCK/W33
22336 CC/C3W33
22336 CC/C3W502
22336 CC/W33
22336 CCJA/W33VA405
22336 CCK/C3W33
22336 CCK/W33
22338 CC/C3W33
22338 CC/W33
22338 CCJA/W33VA405
22338 CCK/C3W33
22338 CCK/C4W33
22340 CC/C3W33
22340 CC/C4W33
22340 CCJA/W33VA405
22340 CCK/C2W33
22340 CCK/C3W33
22340 CCK/W33
22344 CC/W33
22344 CCK/C2W33
22344 CCK/C3W33
22344 CCK/W33
22348 CCK/W33
22352 CC/W33
22352 CCK/C3W33
22352 CCK/W33
22356 CC/C3W33
22356 CC/W33
22356 CCK/W33
230/500 CA/W33
230/500 CAK/C083W506
230/500 CAK/C3W33
230/500 CAK/W33
230/530 CA/W33
230/530 CAK/W33
230/560 CA/C08W33
230/560 CA/C08W509
230/560 CA/C08W513
230/560 CA/C3W33
230/560 CA/W33
230/560 CAK/C3W33
230/560 CAK/C4W33
230/600 CA/C083W509
230/600 CA/C08W509
230/600 CA/C3W33
230/600 CA/W33
230/600 CAK/C083W506
230/600 CAK/C08W506
230/600 CAK/C08W507
230/600 CAK/C3W33
230/600 CAK/W33
230/630 CAK/C083W33
230/630 CAK/C3W33
230/630 CAK/W33
230/670 CA/W33
230/670 CAK/W33
23022 CC/C3W33
23022 CC/C4W33
23022 CC/W33
23022 CCK/C3W33
23024 CC/C3W33
23024 CC/C4W33
23024 CC/W33
23024 CCK/W33
23026 CC/C4W33
23026 CC/W33
23026 CCK/C3W33
23028 CC/C3W33
23028 CC/C4W33
23028 CC/W33
23028 CCK/C2W33
23028 CCK/C3W33
23028 CCK/C4W33
23028 CCK/W33
23030 CC/C3W33
23030 CC/W33
23030 CCK/C3W33
23030 CCK/C4W33
23030 CCK/W33
23032 CC/C3W33
23032 CC/C4W33
23032 CC/W33
23032 CCK/C3W33
23032 CCK/C4W33
23032 CCK/W33
23034 CC/C3W33
23034 CC/W33
23034 CCK/C4W33
23034 CCK/W33
23036 CC/C3W33
23036 CC/C4W33
23036 CC/W33
23036 CCK/C3W33
23036 CCK/C4W33
23038 CC/C3W33
23038 CC/C4W33
23038 CC/W33
23038 CCK/C3W33
23038 CCK/C4W33
23038 CCK/C5W33
23038 CCK/W33
23040 CC/C08W33
23040 CC/C3W33
23040 CC/W33
23040 CCK/C4W33
23040 CCK/W33
23044 CC/C3W33
23044 CC/C4W33
23044 CC/W33
23044 CCK/C3W33
23044 CCK/C4W33
23048 CC/C3W33
23048 CC/C4W33
23048 CC/W33
23048 CCK/C3W33
23048 CCK/C4W33
23048 CCK/W33
23052 CC/C08W506
23052 CC/C5W33
23052 CC/W33
23052 CCK/C3W33
23052 CCK/W33
23056 CAC/C3W33
23056 CAC/C4W33
23056 CAC/W33
23056 CACK/C3W33
23056 CACK/C4W33

More information about bearing,  please contact me.

SKF ,  FAG , TIMKEN , NSK , KOYO , NACHI , NTN , INA , Luk , IKO , THK ,   FYH , ASAHI , SNR, NADELLA , URB, ZKL, ZVL ,  TORRINGTON ,  JNS, IJK , GMN , GRW , STIEBER, DODGE, FAFNIR , MCGILL , ROLLWAY, LINK-BELT ,PEER,RHP, FLT  etc

 
More information about bearing,  please contact me.

OBetter Bearing company can supply the  quality bearing with the competitive Price.  please contact me.

manufacturer and exporter
Co. Name: Shandong Obetter Bearing Co., Ltd
WebSite: www.obtbearing.com  
E-mail: obtbearing@163.com 
Mobile & WhatsApp : 0086-130-6503-2620

tag: china bearing factory ,  ball bearings, roller bearings,   chinese bearing company,  chinese bearing factory,cheap bearings ,  china bearing manufacturer , bearing supplier ,   good quality bearings,  lowest price bearings , auto bearings,   
rodamientos - roulements - подшипникии  - cuscinetti - rolamentos - lo?iska - rulmanlar - Kegelrollagers - rulman